댓글 쓰기 권한이 없습니다. 로그인 하시겠습니까?
한국과학사학회지, 제29권 제2호 (2007), 351-373
금속활자 밀랍주조법 주형재료: 유성 탄소의 복원실험 연구 (An Experimental Study for Restoration of Mould Material - Oil Carbon-for Metal Type Wax Casting Method)
by 조형진 ( Hyung Jin Cho )
첨부파일 '1' |
---|
초록 | This study applied empirical approach in order to restore mould material for metal type wax casting method. (1) Matrix Material: wax, pine resin-added wax and paraffin were used. (2) Mould Material: any sticky clay was acceptable as main material. Oil carbon was useful as the functional material, and its adding proportion was 20 percent. (3) Component of Alloy, Pouring Quantity and Method: it was possible to make an alloy of copper with 55 through 70 percent. The amount of metal poured was a very small quantity of around 200 grams, and conventional pouring method was also applicable. (4) Number of Character Strokes: it was not specifically related to the success of casting method. (5) Success and Contraction Rate of Casting: the success rate of casting was 0.40%, and its contraction rate was 95.14%. |
---|---|
주요어 | wax casting method, mould material, clay, oil carbon |
조형진 ( Hyung Jin Cho ), "금속활자 밀랍주조법 주형재료: 유성 탄소의 복원실험 연구 (An Experimental Study for Restoration of Mould Material - Oil Carbon-for Metal Type Wax Casting Method)", 『한국과학사학회지』 29권 2호 (2007), 351-373
Category
- 제45권 (2023)
- 제44권 (2022)
- 제43권 (2021)
- 제42권 (2020)
- 제41권 (2019)
- 제40권 (2018)
- 제39권 (2017)
- 제38권 (2016)
- 제37권 (2015)
- 제36권 (2014)
- 제35권 (2013)
- 제34권 (2012)
- 제33권 (2011)
- 제32권 (2010)
- 제31권 (2009)
- 제30권 (2008)
- 제29권 (2007)
- 제28권 (2006)
- 제27권 (2005)
- 제26권 (2004)
- 제25권 (2003)
- 제24권 (2002)
- 제23권 (2001)
- 제22권 (2000)
- 제21권 (1999)
- 제20권 (1998)
- 제19권 (1997)
- 제18권 (1996)
- 제17권 (1995)
- 제16권 (1994)
- 제15권 (1993)
- 제14권 (1992)
- 제13권 (1991)
- 제12권 (1990)
- 제11권 (1989)
- 제10권 (1988)
- 제9권 (1987)
- 제8권 (1986)
- 제7권 (1985)
- 제6권 (1984)
- 제5권 (1983)
- 제4권 (1982)
- 제3권 (1981)
- 제2권 (1980)
- 제1권 (1979)
Designed by sketchbooks.co.kr / sketchbook5 board skin